If you have trees around your house, taking proper care of them is the best way to ensure you continue to enjoy their benefits. However, sometimes tree removal is the last result when you have tried everything to restore a tree’s health or natural beauty with no success.
Tree removal is the process of removing a hazardous or potentially hazardous tree to protect your home, loved ones, and your garden.
Tree removal is a delicate process requiring the best tree removal techniques, care, and precision to ensure safety. Here is everything you need to know about tree removal, including modern removal techniques.
When is tree removal necessary?
Unless you are planning to remove a tree for aesthetic reasons, it is important to know the signs to look out for when it comes to tree removal. You can look out for different tree issues that signify the need for removal before calling a tree removal company. When unsure if an issue calls for complete tree removal, you can always consult with a professional to get an accurate diagnosis.
Reasons for tree removal can include:
Dead, sickly, or damaged trees
Any tree exhibiting any of these three signs can be hazardous as they can break and fall without notice, causing damage to your house or a threat to you and your loved ones. If you have a sick or damaged tree that you have been unable to treat successfully, you should consider removing it for your safety and the neighboring plants.
If you have a tree that is leaning too much, an arborist can assess the situation and give the best solution. Sometimes, a leaning tree is a sign of a weak or sick root system, which puts the tree at risk of falling for a lack of proper support. In this case, it is best to have the tree completely removed to protect your property and the people around it.
Need for space
If you need to create more outdoor space, you can consider removing a tree from your backyard. This can clear space for a building project. You can also remove a tree that is too close to your house or other structures.
If one of your trees has fallen on another, it is best to remove the fallen tree before it causes further damage to the surrounding vegetation.
If you’re looking particularly for a guide on how to remove a small tree, please check out this!
Tree removal techniques used by professionals
There are many different tree removal techniques used in the modern day. Generally, the tree removal technique used is determined by the tree’s condition, size, and location. You can consult with a tree removal company to determine the best method to remove a tree.
Tree felling is a technique used to cut down a standing tree. There are many considerations made before settling for this removal method. This ensures safety for everyone around the tree during the process and that it is the best method for the result you want to achieve.
Before felling a tree, the professionals assess the surrounding area looking for possible obstacles to avoid. They also evaluate the tree’s condition as felling a dead or damaged tree comes with a higher risk of falling unexpectedly in any direction.
The professionals also determine the direction they want the tree to fall by using a back cut and an undercut.
Also referred to as the notch cut, the undercut is made on the side of the tree facing the desired direction of fall. The cutting professionals use chain saws to make V-shape cuts into the tree. The depth of the cut depends on the lean and size of the tree.
The back cut is made on the opposite side of a tree, slightly above the north cut bottom. This cut is done halfway through a tree to leave part of the trunk to act as a hinge between the undercut and the back cut. The uncut section controls the fall of the tree.
Once both cuts have been made, the tree starts to fall. The arborist will need to remove the chainsaw and run to safety before the tree falls. Limbing and bucking can begin after the tree has fallen.
Limbing is the process of removing tree limbs while bucking is the cutting of fallen trees into smaller pieces. These two processes make the cleaning up process easier after a felling process.
Crane-assisted tree removal
This is one of the most modern tree removal techniques. It is popular in urban areas to cut down very large trees. A crane-assisted tree felling method involves cutting down trees piece by piece and using a crane to remove the pieces.
For this job, a tree cutting professional climbs on the tree for the removal process supported using a harness and other safety gear. Different parts of the tree are supported using ropes or cranes secured onto the crane before the pieces are cut with a chainsaw. The crane safely takes the cut parts from the tree to the ground.
Once the tee is completely removed, the next phase of the process is stump removal. While it is tempting to leave it in the yard, stumps are highly infectious and pose a threat to the other pants in case of an infection.
Stump grinding is a common method used to remove stamps using a stump grinder. This machine features an arm and wheel. The arm moves the wheel back and forth across the stamp as it grinds it into smaller pieces.
Once completely removed, you can use topsoil to cover the hole left by the tree stump.
Read More: Should I Remove a Tree Close to A House
Tree removal techniques FAQs
What is the most common method of removing trees?
Felling a tree is the most common method of removal. This traditional approach is done by chopping or cutting the tree’s base until the trunk falls. This simple approach only requires a chainsaw or ax and allows workers to remain on the ground.
What is a feller buncher?
It is a motorized vehicle with an attachment that can rapidly gather and cut a tree before felling it. Feller is a traditional name for someone who cuts down trees, and bunching is the skidding and assembly of two or more trees.
What equipment do you need to cut trees?
You need a handsaw or chainsaw. While pruning loppers and shears can do a lot, you can only remove all the branches from a tree and remove the tree using a handsaw or chainsaw.